X-Fly Transmitter

Let's start, give us 1-2 minutes of your time !

To ensure we have a comprehensive understanding of your requirements, we will guide you through a series of questions related to the layout of your transmitter and the specific needs of your receiver.

Firstly, let's clarify that the transmitter refers to the device you physically hold in your hands, while the receiver is the device that is attached to your machine.

Throughout the questionnaire, you will have the opportunity to choose from a range of catalog configurations. This includes selecting the desired number of push buttons, stickers, and frequency settings that best suit your needs.

Once you have completed the TX section, you will be just four questions away from providing us with all the basic information we require to proceed.

Rest assured, within less than 48 hours, you will receive a quote that serves as a solid starting point for our further discussions and customization options.

Have a short but great survey !

E-Chronos Team

Fast Delivery Product ? *

You can choose from the available pre-configurations. These predefined options are designed to offer a quick and convenient selection of products that suit your needs. You can easily select one of these options and proceed with the quote promptly.

If you prefer to have more precise control over the features and specifications of the product, you have the option to browse through our more detailed catalog. This way, you can define a more specific product that meets your specific requirements. Please note that this option may take a little longer to deliver, as the product will need to be configured according to your preferences.

Whichever option you choose, we are here to assist you throughout the process and address any questions you may have by email : here

Fast Delivery Product

Select Catalog Product

Select a Fast Delivery product *

- Main : 8 Linear joysticks
- Top : 1xON-ON / 3xMOM / 1xStart
- Left : None
- Right : EStop

- Main : 8 linear joysticks
- Top : 1xScreen / 6xPushs
- Left : 2xMOM / 2xPushs
- Right : EStop

- Main : 3x2axis joysticks
- Top : 1xON-ON / 3xMOM / 1xStart
- Left : None
- Right : Estop

X-FLY : A-E-P-R-L

X-FLY : A-G-Q-R-L

X-FLY : D-E-P-R-L

Main Layer *

A, 8 linear joysticks

B, 6 linear joysticks

C, 2x3axis joysticks

D, 3x2axis joysticks

Top layout *

E, 1 ON-ON / 3 MOM / 1 Start

F, 1 Pot / 3 MOM / 1 Start

G, 1 Screen / 6 Pushs

Left Side *

P, Nothing

Q, 2 toggles, 2 push

Right Side *

R, Emergency Stop

S, 2 Toggles, 2 Pushs, 1 Emergency Stop

Frequency *

868MHz is used for Europe, and most of African country

920 MHz is used in all America, Australia, Asia

If you don't know give us the country destination and we will check it for you !

L, 868MHz

H, 920MHz

If you tells us which country we will double check the frequency you need

Receiver output *

CANopen bus

Physical PWM

The proportional valve your are using is a current control
Most of valve market.

Physical VC

The proportional valve you are using is a Voltage Control known as "Danfoss"

CAN open

Physical (Proportional = Voltage Control)

Physical (Proportional = PWM)

Physical Relays

If other, please specify:

Manual Dump valve activation ?

In some circustances, you might need to drive your machine with hydrolic levers. Once a remote control is placed in your hydrolic circuit a dump valve should be placed in series with other valves.

This dump valve is there to secure your machine and the digital must be activated to do any kind of mouvement of your machine. But in "Manual" there is no radio activation, then no dump valve.

To address this situation, the toggle switch will bypass the E-Chronos receiver and supply the dump valve directly.

The Emergency Button will stop either the coomplet reciever in radio mode, or the dump valve in manual mode to put your machine under safe conditions.

No buttons